| Home |  |
About Us | |
Material Safety Data Sheets | |
Compliance Documents | |
Distributors | |
Sales Reps | |
Request a Sample | |
Contact Us |
About UsEasy Braid Co. is a manufacturer of desoldering wick with an emphasis on continuing advancement in desoldering braid technology. Established in 1989, Easy Braid Co. quickly achieved widespread recognition in the rework/repair industry with its competitive pricing and innovative product line. Easy Braid Co. utilizes the sales support and services of over 200 representatives located throughout the United States and in 20 additional countries spanning six continents. Our international sales base continues to grow and strengthen with each new Easy Braid Co. advancement. With products, packaging, and flux technologies constantly changing—particularly in the development of water soluble and no-clean fluxes, fine pitch components and arrays—high quality and consistent performance is essential. By manufacturing in compliance with ISO9002 standards, and through our strict adherence to Statistical Process Control (SPC), Easy Braid Co. can assure you the highest quality products and guarantee the consistency of that quality. Desoldering BraidEasy Braid Co.’s desoldering wick products are made using ultra fine, oxide-free copper braided into a weave configuration which maximizes thermal conduction and solder retention. Immediately after braiding, the wick is cleaned in an environmentally friendly process unique to Easy Braid Co. Every precaution is taken to ensure that the desoldering braid remains oxide-free until it is coated through our proprietary flux process. Our closed weave design requires less time for desoldering, thus minimizing lifted pads and thermal damage and absorbing up to 30% more solder mass. This enables an operator to get on and off a connection quickly, using less wick to accomplish the task. Stencil RollsEasy Braid Co. applies the same technologies to its stencil rolls for optimum cleaning while using the least amount of paper to absorb most solder paste. Unlike other stencil roll manufacturers who re-spool readily available paper to fit various screen printers, Easy Braid Co. utilizes a paper that is specifically designed for maximum absorption of solder paste in a stencil-cleaning environment. Solder SoakersSpecial RoHS compliant die-cut sponges designed specifically to aid in the cleaning of electronics. Replacement Soldering TipsA wide range of Soldering Iron Tips are available with excellent performance and reliability. SwabsDurable, versatile swabs for cleaning electronics. Fume Extraction SystemsThe latest in technology for removing fumes and odors at a constant flow in today's workplace. VPI-Optical Inspection SystemThe VPI-Optical Inspection System is one of the finest pieces of inspection equipment for BGA reflow analysis available in the electronics market. Equipped with Easy Braid's endoscope lens to check for bridging, cold solder joints, and shorts, the VPI-Optical Inspection System is able to inspect under array packages with heights as low as 0.002” (0.051mm) and with clearances of 0.043” (1.1mm) between components. Solder Paste Inspection SystemsEasy Braid also provides solder paste inspection systems in support of analysis and monitoring in the solder paste printing process. Our off-line and 3D solder paste inspection systems are a cost effective solution to monitoring defects of assembled PCBs, and also offer the greatest accuracy. Request a Sample or contact Easy Braid Co. today to learn more about our visual inspection systems and desoldering braid! |
 |
11543 K-Tel Drive